Sidewall Seal Kit
Sidewall Seal Kit
✔️ Risk Free Guarantee
✔️ Made in 🇺🇸 America
✔️ Free Shipping
The Sidewall Seal Kit was designed to patch slices orpunctures on the sidewall of your tire. Slightly thicker than the External Patch Kit and with more surface area, the Sidewall Seal kit is designed specifically for larger damage.
The Sidewall Seal Kit is ideal for repairing any large sidewall damage.
For off-road use only.
- Patch a sidewall
- Patch a puncture
- Patch a slice
- Strengthen bulging interior patch
- Reinforce damaged area
With enough material to patch 1-4 tires, this kit is great to keep in your truck, tractor, ATV or UTV.
(1) Patch Dimensions: 4"x4.5"x3/16"
(4) Pieces of sandpaper
(1) 2g bottle of GlueTread Adhesive
(1) Instructional Insert
Bond Strength: 5,000 PSI
Patch Durometer: 75
Initial Cure Time: 30 Seconds
Full Cure Time: 1 Hour
(Immediate cure when used with GlueTread Accelerator)
Here at GlueTread, we believe in our product and stand behind it no matter what. If you are not satisfied with your purchase in any way, please let us know and we will refund you immediately.
So far so good
The sidewall repair kit appears to work well.Time will tell with bush hogging through tough brush, but so far, so good.
Didn’t work on SXS tire
Followed the instructions, took my time and let it set for a few hours before putting 12 psi in the tire. Didn’t work, I’ll stick with tire plugs here on out.
Loved the product and the instructions. Instagram.com/calduc
Process was very easy and the patch worked great. Had a 2" slice at top of sidewall on my Commercial Ferris zero turn mower and seal is working very well.
So Far a Great Savings that Works
This is my experience. Yours may vary. My repair was on a sidewall on a 10 year old, rear tractor tire that would have cost $1,000 to replace plus the time to get a proper tire. I followed the directions and I must say it is a good looking repair and it is leak free after putting it under significant stress. Time will tell how it holds up, and I will take care not to put the tractor in a position that will cause danger if it fails, but right now it is saving me a significant amount of money. The repair does require a clean, sanded repair area and it takes a few minutes. (Cleaning requires getting rid of the loose dirt. The sanding is fast with the supplied sandpaper and it rids the area of tight surface dirt.) The cutting and application of the patch is somewhat tedious if you want a neat, strong job. I had everything I needed ready and probably spent 20 minutes on the entire application. Take your time and you will do a better job. Bottom line its a great emergency patch to have on hand. It made a neat and tough patch job, and to this point with no sign of impending failure, and it is reasonably priced.