Polaris® Snowmobile Paddle Repair Kit
Made in the USA
Free US Shipping over $95
Officially licensed Polaris® product
Polaris® x GlueTread Snowmobile Paddle Repair Kit
Officially licensed. Built to save your track.
Your track takes a beating every time you ride. Hard acceleration, spinning paddles, icy trails, buried stumps, and deep powder all put stress on your lugs. Over time, small tears turn into missing paddles — and missing paddles turn into expensive replacements.
The Polaris® x GlueTread Snowmobile Paddle Repair Kit is an official licensed product of Polaris®, made by GlueTread in the USA. It lets you repair torn paddles in minutes, with no need to remove the track.
It carries six patches in two sizes and three tubes of GlueTread adhesive, along with a sanding disc, sandpaper, applicator tips and gloves. Everything you need to prep the surface properly and bond a patch that holds.
Restore traction. Stop tears from spreading. Get more seasons out of the track you already own.
Kit Contents:
The Polaris® x GlueTread Snowmobile Paddle Repair Kit includes:
Patches:
- [2] 4” x 4.5” patches
- [4] 3” x 1.5” patches
Adhesive Supplies:
- [3] Tubes of GlueTread Adhesive (4g)
- [6] Applicator Tips
- [10] Pieces of Sandpaper
Repair Tools:
- [1] Sanding Disc
- [2] Rubber Gloves
- [1] Instruction Manual
Officially licensed by Polaris®.
This kit is an official licensed product of Polaris® Industries Inc., built and assembled by GlueTread in the USA.
Inside is GlueTread’s proven paddle repair system: external rubber patches bonded with GlueTread adhesive, which needs no accelerator. Sand the damaged lug, apply adhesive, press the patch over the tear, and let it cure.
It is a garage repair, not a trailside fix — built to restore traction and extend the life of your track before a small tear becomes a missing paddle.
Real Damage, Real Results
Use the slider to view a before-and-after of a damaged lug.
What starts as a partial tear almost always turns into a full paddle failure. Once a lug begins separating, continued riding will rip it the rest of the way off — and over time, that can compromise the surrounding paddles and weaken the entire track.
By repairing the damage early with GlueTread, you stop the tear from spreading and restore strength to the lug before the problem gets worse.
Simple repair. Major savings. More miles on your current track.
How it works
Repair a torn paddle in five steps.
- Put adhesive in the tear and hold the paddle back together.
- Clean and smooth the cracked paddle with the sanding disc.
- Apply adhesive to the patch.
- Place the patch over the cracked paddle to reinforce it, and hold for 30 seconds.
- Let cure for 5–10 minutes.
Why we built this.
Snowmobile tracks aren’t cheap. One torn lug can eventually lead to replacing an entire track — a repair that often costs thousands of dollars in parts and labor.
We built GlueTread’s paddle repair kit to stop that from happening: catch the tear early, patch it, and keep riding the track you already own.
The Polaris® x GlueTread kit puts that same repair in an officially licensed package for Polaris® riders.
Thousands of miles.
The durability of GlueTread patches has been tested the way it matters most — in real riding conditions.
We’ve ridden thousands of miles on trail and in the mountains, on everything from older trail sleds to modern high-horsepower turbo machines. Deep snow, icy trails, aggressive throttle — the patches have held.
Across mountain climbs, hardpack trails, and backcountry miles, GlueTread repairs have stayed intact and saved hundreds of tracks from premature replacement.
WATCH: HOW TO COMPLETE THE REPAIR
Click below
Official licensed product of Polaris® Industries Inc., all rights reserved. POLARIS®, and the POLARIS® Logos are trademarks of Polaris® Industries Inc.