Tractor How To

Collapsible content

Step 1: Prep the Surface.

Thoroughly sand down around the damaged area

Step 2: Apply Adhesive to the Damaged Area

Hold the damaged area back together. Allow 1 minute to cure. Re-sand to remove excess adhesive.

Step 3: Measure Patch and Trace on Tire

Cover at least ½ inch around the damaged area. (more edge is better)

Step 4: Apply Adhesive

IMPORTANT: Follow the adhesive pattern instructions and use tiny dots of adhesive in a grid like patterns.

Immediately and carefully set patch in place. 

Apply pressure evenly for one minute. 

Ensure edges and corners are fully adhered.

Step 5: Wait to Inflate.

Allow 1 hour for adhesive to cure fully. Inflate and ride!