The paddle repair kit riders asked for
The same permanent paddle repair that helped riders save damaged tracks last season—now with double the rubber, double the adhesive, and enough material for an estimated 10–15 repairs.
Repair your paddle before it tears off
Once a snowmobile paddle begins to split, the tear can continue growing until the paddle rips off. GlueTread reinforces the damaged paddle and helps preserve the track instead of replacing it.
A split paddle can continue tearing as the track cycles under load.
If the paddle rips off, the track loses material that cannot be put back.
GlueTread reinforces the damaged paddle before the tear spreads farther.
Choose your repair capacity
Both kits use the same permanent paddle repair system. The difference is how many repairs you want to carry.
For minimum repair needs
The original kit for riders who want proven paddle protection in a compact package.
For maximum repair capacity
Double the rubber and double the adhesive for riders who want more repairs in one kit.
Built from rider feedback
Real paddle damage
Five-minute repair
Prep the damaged area, apply the adhesive and rubber patch, then allow the repair to cure.
Clean and prepare the split area according to the included instructions.
Bond the GlueTread rubber across the damaged section of the paddle.
Let the repair set, verify the bond, and follow all product instructions before riding.
Seen on @SnowestMagazine
Watch the SnoWest post that introduced the paddle repair to hundreds of thousands of snowmobile riders.
GlueTread's first permanent repair offering
The paddle repair system is designed to stop the damaged section from continuing to separate. It is intended for paddle repairs, not repairs to the track structure itself.
Before you repair
This kit is designed to repair damaged snowmobile track paddles. It is not marketed as a repair for the structural track body, cords, clips, rods, or other track components.
The paddle repair system has been used successfully across a variety of snowmobile track paddles. Because track materials, paddle designs, damage patterns, temperatures, and preparation conditions vary, inspect each repair carefully and follow the included instructions.
GlueTread has not tested or approved this kit as a repair for the track structure itself. Other riders have reported success repairing worn track areas, but those uses have not been validated by GlueTread and are not the intended application of this kit.
Both kits use the same paddle repair system. The Standard kit provides an estimated 5–7 repairs. The Pro kit doubles the rubber and adhesive and provides an estimated 10–15 repairs.
The repair has a five-minute cure time when applied according to the product instructions and under appropriate conditions.
