External Kit How To
Step 1: Prep the Surface.
Thoroughly sand down around the damaged area
Step 2: Apply Adhesive to the Damaged Area
Hold the damaged area back together. Allow 1 minute to cure. Re-sand to remove excess adhesive.
Step 3: Measure Patch and Trace on Tire
Cover at least ½ inch around the damaged area. (more edge is better)
Step 4: Apply Adhesive
IMPORTANT: Follow the adhesive pattern instructions and use tiny dots of adhesive in a grid like patterns.
Immediately and carefully set patch in place.
Apply pressure evenly for one minute.
Ensure edges and corners are fully adhered.
Step 5: Wait to Inflate.
Allow 1 hour for adhesive to cure fully. Inflate and ride!