The GlueTread Expedition Kit is designed for repairing ANY kind of tire damage you may get on the trail. Rather you need to repair a sidewall, replace a valve stem, or plug a puncture, you'll be covered!

The package contains a full GlueTread Sidewall Repair Kit, 2 Colby Valve Stems, a plug kit with insertion T-handles and instructions. The T-Handles are manufactured locally in our shop out of CNC machined aluminum.

The GlueTread Expedition Kit includes our improved rubber formula and doesn't include the accelerator. Here's why:

We've improved our rubber formula, which allows the adhesive to cure more quickly without the accelerator. Additionally, when the accelerator is stored near the adhesive, it cures the adhesive more quickly. By removing the accelerator, we improve the shelf life of your adhesive. 

We received a lot of feedback that patches applied without the accelerator adhere better and last longer on a compromised sidewall. The cure time without the accelerator and the improved rubber formula is about ten minutes.

Notes: Incase you already have a GlueTread kit, the Colby Valves are also available on the GlueTread website. For off-road use only.

• Repairing sidewall damage
• Repairing a sliced tire
• Repairing a punctured tire
• Replace a damaged valve stem
• Repair a puncture in the tread area
• Adding extra protection to areas of a tire that are worn
• Covering cord
• Covering a bulging tube
• Covering an internal patch
• Covering and repairing a cracked tire to keep out debris
• Preventing a higher risk area from leaking in the future
• Replacing a leaky valve stem

[2] 4" x 4.5" Patch

[2] 3' x 1.5' Patch

[5] Bottles GlueTread Adhesive

[10] Applicator tips

[1] T-Handle with Probe

[1] T-Handle with Needle

[12] Plugs

[4] Valve Caps, [4] Valve Cores

[1] 4-way tool

[20] Pieces of sandpaper

[1] Hex Key

[1] Cordura Bag

Pressure Strength: 40 PSI
Bond Strength: 5,000 PSI
Patch Durometer: 75
Initial Cure Time: 30 Seconds
Full Cure Time: 10 Minutes