How strong is GlueTread???
A lot of people have been asking does the GlueTread adhesive really hold the tread onto the tire? We are here to say yes it does!
In the video above we show how to take tread and the adhesive and add traction to your tire.
The first thing that we are going to do is take a 3 inch tread and add several drops of adhesive to it. See the diagram below for instruction on exactly how much adhesive to add.
We then apply the tread directly to the tire.
See the diagram below for instructions on where to place the new lug on the tire.
As you will see, we hold this tread on the tire for 30 seconds. We have the stopwatch running in the background so you can see for yourself. Normally, we let the adhesive cure for one hour but in this video, we wanted to show you the strength of the adhesive after curing for less than one minute.
Watch as Dave tries to remove the new tread with channel locks.
When you are using this kit on your tire, allow the bond to cure for one hour before returning the vehicle to normal use. In this video, you will see the strength of adhesive after just 60 seconds!
Feel free to leave some comments below, we would love to hear your thoughts!